KTM 690 Duke AU/GB 2014, Инструкции по установке

Страница: 13 / 15

4 TECHNICAL DATA - TIGHTENING TORQUES FOR CHASSIS
11
Screw, footrest bracket, rear M8x45 Countersunk screw
25 Nm (18.4 lbf ft) Loctite ® 243™
Screw, fork stub M8 15 Nm (11.1 lbf ft)
–
Screw, front brake disc M8 30 Nm (22.1 lbf ft) Loctite ® 243™
Screw, front footrest bracket M8 25 Nm (18.4 lbf ft) Loctite ® 243™
Screw, handlebar clamp M8 20 Nm (14.8 lbf ft)
–
Screw, handrail M8x30 Countersunk screw
18 Nm (13.3 lbf ft)
Loctite
®
243™
Screw, handrail, cover M8x20 18 Nm (13.3 lbf ft) Loctite ® 243™
Screw, ignition lock (tamper-proof
screw) M8 Loctite ® 243™
Screw, license plate holder M8 18 Nm (13.3 lbf ft) Loctite ® 243™
Screw, linkage bracket, front engine
fixing arm M8 25 Nm (18.4 lbf ft) Loctite ® 243™
Screw, main silencer clamp (Duke R) M8 15 Nm (11.1 lbf ft)
–
Screw, main silencer fixation M8 25 Nm (18.4 lbf ft)
–
Screw, rear brake disc M8 30 Nm (22.1 lbf ft)
Loctite ® 243™
Screw, side stand bracket M8 25 Nm (18.4 lbf ft) Loctite ® 243™
Screw, spring holder on side stand
bracket M8 25 Nm (18.4 lbf ft) Loctite ® 243™
Screw, top triple clamp M8 17 Nm (12.5 lbf ft)
–
Engine carrying screw M10 45 Nm (33.2 lbf ft) Loctite ® 243™
Remaining nuts, chassis M10 45 Nm (33.2 lbf ft)
–
Remaining screws, chassis M10 45 Nm (33.2 lbf ft)
–
Screw, foot brake lever M10 25 Nm (18.4 lbf ft)
–
Screw, handlebar support M10 20 Nm (14.8 lbf ft)
–
Screw, side stand M10 35 Nm (25.8 lbf ft) Loctite ® 243™
Screw, subframe M10 45 Nm (33.2 lbf ft) Loctite ® 243™
Banjo bolt, brake line M10x1 22 Nm (16.2 lbf ft)
–
Banjo bolt, pressure modulator M10x1 20 Nm (14.8 lbf ft)
–
Screw, bottom shock absorber M10x1.25 50 Nm (36.9 lbf ft) Loctite ® 243™
Screw, front brake caliper M10x1.25 45 Nm (33.2 lbf ft)
Loctite
®
243™
Screw, top shock absorber M10x1.25 50 Nm (36.9 lbf ft) Loctite ® 243™
Lambda sensor M12x1.25 25 Nm (18.4 lbf ft)
–
Nut, frame to linkage lever M14x1.5 100 Nm (73.8 lbf ft)
–
Nut, linkage lever on swingarm M14x1.5 100 Nm (73.8 lbf ft)
–
Nut, linkage lever to rocker arm M14x1.5 100 Nm (73.8 lbf ft)
–
Nut, swingarm pivot M16x1.5 100 Nm (73.8 lbf ft)
–
Screw, steering head M20x1.5 40 Nm (29.5 lbf ft)
–
Adjusting ring of swingarm bearing M24x1.5 25 Nm (18.4 lbf ft)
–
Screw, front wheel spindle M24x1.5 45 Nm (33.2 lbf ft)
–
Nut, rear wheel spindle M25x1.5 90 Nm (66.4 lbf ft)
–
Nut, steering head M28x1 12 Nm (8.9 lbf ft)
–