32/CLUTCH
95
19.1
Checking the fluid level of hydraulic clutch
Info
The fluid level rises with increasing wear of the clutch lining disc.
Do not use brake fluid.
700419-01
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
.
–
Remove cover
with membrane
.
–
Check the fluid level.
Fluid level under top level of container
4 mm (0.16 in)
» If the level of the fluid does not meet specifications:
–
Correct the fluid level of the hydraulic clutch.
Hydraulic fluid (15) (
–
Position the cover with the membrane. Mount and tighten the screws.
19.2
Changing the hydraulic clutch fluid
Warning
Environmental hazard
Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc., according to regulations.
Info
The fluid level rises with increasing wear of the clutch lining disc.
300669-10
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
.
–
Remove cover
with membrane
.
300670-10
–
Fill bleeding syringe
with the appropriate hydraulic fluid.
Bleed syringe (50329050000) (
Hydraulic fluid (15) (
–
On the slave cylinder, remove the bleeder screw and mount bleeding syringe
.
300671-10
–
Inject the liquid into the system until it escapes from drill hole
of the master
cylinder without bubbles.
–
To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
–
Remove the bleeding syringe. Mount and tighten screws bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level under top level of container. 4 mm (0.16 in)
–
Position the cover with the membrane. Mount and tighten the screws.
877-999-5686
