30/ENGINE - WORK ON INDIVIDUAL PARTS
66
16.12
Disassembling the clutch
300812-10
–
Remove screws
.
–
Take off the spring retainer.
300813-10
–
Remove the springs.
–
Take off inner clutch hub
.
300814-10
–
Take off clutch discs
from the clutch pressure cap.
16.13
Checking the clutch
0
0
8
8
0
0
7
7
0
0
7
7
0
0
8
8
0
0
9
9
0
0
3
3
0
0
2
2
0
0
bk
bk
0
0
4
4
0
0
1
1
0
0
5
5
0
0
5
5
0
0
6
6
300805-01
–
Check pressure piece
for damage and wear.
» If there is damage or wear:
–
Change the pressure piece.
–
Check the length of clutch springs
.
Clutch spring - length
21.5… 21.9 mm (0.846… 0.862 in)
» If the clutch spring length is less than the specified value:
–
Change all clutch springs.
–
Check the contact surface of inner clutch hub
for damage and wear.
» If there is damage or wear:
–
Change the inner clutch hub.
–
Check the contact surfaces of the clutch facing discs in outer clutch hub
for
wear.
Contact surface, clutch facing discs in
outer clutch hub
≤
0.5 mm (
≤
0.02 in)
» If the contact surface is very worn:
–
Change the clutch facing discs and the outer clutch hub.
–
Check needle bearing
and collar bushing
for damage and wear.
» If there is damage or wear:
–
Change the needle bearing and collar bushing.
–
Check intermediate discs
for damage and wear.
» If the intermediate discs are not level and have pittings:
–
Change all clutch discs.
–
Check clutch facing discs
for discoloration and scoring.
» If there is discoloration or scoring:
–
Change all clutch facing discs.
PartShark.com
877-999-5686
