KTM 65 SX 1999, Руководство пользователя, Страница: 32 / 91

11 SERVICE WORK ON THE CHASSIS
30
H00163-11
–
Position the fork protector on the left fork leg. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line. Mount clamp

.
–
Mount screws

.
11.7 Removing the fork legs
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 28)
–
Remove the front wheel. ( p. 58)
K00208-10
Main work
–
Remove screws

and take off the clamp.
–
Remove screws  and take off the brake caliper.
–
Hang the brake caliper and the brake line loosely to the side.
S00870-10
–
Loosen screws

. Remove the left fork leg.
–
Loosen screws

. Remove the right fork leg.
11.8 Installing the fork legs
Warning
Danger of accidents
Modifications to the suspension settings can seriously alter the vehicle's ride behavior.
–
Following modifications, ride slowly at first to get the feel of the new ride behavior.
K00205-10
Main work
–
Position the fork legs.
Info
The upper milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws

to the front.
S00870-11
–
Tighten screws  .
Guideline
Screw, top triple clamp M8 20 Nm
(14.8 lbf ft)
–
Tighten screws

.
Guideline
Screw, bottom triple clamp M8 15 Nm
(11.1 lbf ft)