KTM 530 EXC EU, Руководство пользователя

Страница: 65 / 108

MAINTENANCE WORK ON CHASSIS AND ENGINE
63
9.72
Checking tire condition
Info
Only mount tires approved and/or recommended by KTM.
Other tires could have a negative effect on riding behavior.
The type, condition and air pressure of the tires all have an important impact on the riding behavior of the motorcycle.
The front and rear wheels must be fitted with tires with similar profiles.
Worn tires have a negative effect on riding behavior, especially on wet surfaces.
400602-10
–
Check the front and rear tires for cuts, foreign bodies and other damage.
» If the tires exhibit cuts, foreign bodies or other damage:
–
Change the tires.
–
Check the depth of the tread.
Info
Note local national regulations concerning the minimum tread depth.
Minimum tread depth
≥
2 mm (
≥
0.08 in)
» If the tread depth is less than the minimum allowable depth:
–
Change the tire.
–
Check the age of the tires.
Info
The tire's date of the manufacture is usually part of the tire markings and is
indicated by the last four digits of the
DOT marking. The first two digits refer
to the week of manufacture and last two digits refer to the year of manufac-
ture.
KTM recommends that the tires are changed regardless of the actual wear,
at the latest after 5 years.
» If a tire is more than 5 years old:
–
Change the tire.
9.73
Checking tire air pressure
Info
Low tire air pressure leads to abnormal wear and overheating of the tire.
Correct tire air pressure ensures optimal riding comfort and maximum tire service life.
400241-01
–
Remove the dust cap.
–
Check tire air pressure when tires are cold.
Tire air pressure off road
Front 1.0 bar (15 psi)
Rear 1.0 bar (15 psi)
Road tire pressure
Front 1.5 bar (22 psi)
Rear 2.0 bar (29 psi)
» If the tire pressure does not meet specifications:
–
Correct the tire pressure.
–
Mount the dust cap.