KTM 50 SX 2020, Руководство пользователя

Страница: 83 / 141

BRAKE SYSTEM 12
81
Warning
Danger of accidents Old brake fluid reduces the braking effect.
–
Make sure that brake fluid for the front and rear brake is changed in accordance with the service
schedule. (Your authorized KTM workshop will be glad to help.)
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 41)
–
Check the brake linings of the rear brake. ( p. 82)
H01448-10
Main work
–
Remove screws 1 .
–
Take off cover
2
with washer
3
and membrane
4
.
H01654-10
–
Add brake fluid up to level
A
.
Guideline
Level
A
(brake fluid level
below reservoir rim)
10 mm (0.39 in)
Brake fluid DOT 4 / DOT 5.1 ( p. 130)
–
Position the cover with the washer and membrane.
–
Mount and tighten the screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 41)