KTM 450 SX-F, Руководство пользователя

Страница: 30 / 152

8 RIDING INSTRUCTIONS
28
H04999-10
–
Check lock button
1
to ensure it can move easily.
–
Bend over the handlebars while sitting on the motorcycle.
Grip the rim and compress the fork. Press lock button
1
and decompress slowly until the lock button engages in lock
ring
2
.
When the fork compresses for the first time, the lock but-
ton is released automatically.
8.6 Starting off
–
Pull the clutch lever, engage 1st gear, release the clutch lever slowly and simultaneously open the throttle
carefully.
8.7 Quickshifter
F03643-10
When the quickshifter is activated, you can shift up without actu-
ating the clutch.
Info
The quickshifter is not activated when shifting up from first
to second gear, and the clutch lever must be used when
shifting up instead.
Even if the quickshifter is activated, you need to use the
clutch lever to shift down.
Because there is no need to close the throttle grip, uninterrupted
gear shifts are possible.
The quickshifter uses the shifter shaft position to check whether or
not a shift should be initiated, and sends a corresponding signal to
the engine control.
If the quickshifter is deactivated, the clutch needs to be actuated
in the normal way for each shift.
8.8 Activating the quickshifter
F03760-12
–
Press the QS button
1
to switch the quickshifter on or off.
The QS indicator lamp lights up when the quickshifter is
activated.
Info
The quickshifter is not activated when shifting up from
first to second gear, and the clutch lever must be used
when shifting up instead.
Even if the quickshifter is activated, you need to use
the clutch lever to shift down.