KTM 450 SX-F 2017, Руководство пользователя, Страница: 45 / 125

11 SERVICE WORK ON THE CHASSIS
43
11.9 Removing the lower triple clamp
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 40)
–
Remove the front wheel. ( p. 76)
–
Remove the fork legs. ( p. 42)
–
Remove the start number plate. ( p. 46)
–
Remove the front fender. ( p. 47)
–
Remove the handlebar cushion.
S01211-10
Main work
–
Remove the holder with the malfunction indicator lamp.
–
Open cable holder 1 on the left and detach the wiring harness.
–
Remove screw 2 .
–
Remove screw
3
.
–
Remove the upper triple clamp with the handlebar and set aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
S01212-10
–
Remove O-ring
4
. Remove protective ring
5
.
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
11.10 Installing the lower triple clamp
102146-10
Main work
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease ( p. 114)
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
–
Check whether upper steering head seal
1
is correctly positioned.
–
Slide on protective ring
2
and O-ring
3
.