KTM 450 SX-F 2017 Скачать руководство пользователя страница 33

Страница: 33 / 125

TUNING THE CHASSIS

S01202-10

–

Turn adjusting screw

all the way clockwise with a socket wrench.

Info

Do not loosen fitting

–

Turn counterclockwise by the number of turns corresponding to the shock absorber
type.
Guideline

Compression damping, high-speed (SX

‑

F EU)

Comfort

2.5 turns

Standard

2 turns

Sport

1.5 turns

Compression damping, high-speed (SX

‑

F US)

Comfort

2.5 turns

Standard

2 turns

Sport

1.5 turns

Compression damping, high-speed (XC

‑

F US)

Comfort

2.5 turns

Standard

2 turns

Sport

1.5 turns

Compression damping, high-speed (SX

‑

F Factory Edition)

Comfort

2.5 turns

Standard

2 turns

Sport

1.5 turns

Info

Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.

10.6

Adjusting the rebound damping of the shock absorber

Caution

Risk of injury

Parts of the shock absorber will fly off if the shock absorber is disassembled incorrectly.

The shock absorber is filled with highly compressed nitrogen.

–

Please follow the description provided. (Your authorized KTM workshop will be glad to help.)

S01203-10

–

Turn adjusting screw

clockwise up to the last perceptible click.

–

Turn counterclockwise by the number of clicks corresponding to the shock absorber
type.

Содержание 450 SX-F 2017






























































































































Результаты поиска

Содержание 450 SX-F 2017

Отзывы:

KTM 450 SX-F 2017, Руководство пользователя, Страница: 33 / 125

Результаты поиска

Содержание 450 SX-F 2017

Отзывы: