KTM 390 DUKE 2017 Скачать руководство пользователя страница 166

Страница: 166 / 255

14 WHEELS, TIRES

164

–

Remove the rear of the motorcycle from the lifting gear.
(

p. 115)

–

Check the chain tension. (

p. 126)

14.6

Checking the tire condition

Warning

Danger of accidents

If a tire bursts while riding, the vehicle becomes uncontrollable.

–

Ensure that damaged or worn tires are replaced immediately. (Your authorized KTM workshop will be
glad to help.)

Warning

Danger of crashing

Different tire tread patterns on the front and rear wheel impair the handling charac-

teristic.
Different tire tread patterns can make the vehicle significantly more difficult to control.

–

Make sure that only tires with a similar tire tread pattern are fitted to the front and rear wheel.

Warning

Danger of accidents

Non-approved or non-recommended tires and wheels impact the handling character-

istic.

–

Only use tires/wheels approved by KTM with the corresponding speed index.

Содержание 390 DUKE 2017
































































































































































































































































Результаты поиска

Содержание 390 DUKE 2017

Отзывы:

Похожие инструкции для 390 DUKE 2017

Бренды по названию

Популярные бренды

KTM 390 DUKE 2017, Руководство пользователя

Результаты поиска

Содержание 390 DUKE 2017

Отзывы:

Похожие инструкции для 390 DUKE 2017

Бренды по названию

Популярные бренды