KTM 390 Duke 2015 COL Скачать руководство пользователя страница 108

Страница: 108 / 182

WHEELS, TIRES

106

101900-10

–

Remove nut

and the washer. Remove chain adjuster

–

Holding the rear wheel, withdraw wheel spindle

with the washer and chain

adjuster.

–

Push the rear wheel forward as far as possible and take the chain off the rear sprocket.

Warning

Danger of accidents

Reduced braking effect caused by damaged brake discs.

–

Always lay the wheel down in such a way that the brake discs are not dam-
aged.

–

Pull the rear wheel back and take it out of the swingarm.

Info

Do not operate the foot brake when the rear wheel is removed.

13.4

Installing the rear wheel

Warning

Danger of accidents

Reduced braking efficiency due to oil or grease on the brake discs.

–

Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.

Содержание 390 Duke 2015 COL























































































































































































Результаты поиска

Содержание 390 Duke 2015 COL

Отзывы:

KTM 390 Duke 2015 COL, Руководство пользователя, Страница: 108 / 182

Результаты поиска

Содержание 390 Duke 2015 COL

Отзывы: