KTM 350 EXC-F 2017, Руководство пользователя

Страница: 67 / 129

12 SERVICE WORK ON THE CHASSIS
65
Main work
–
Check throttle cable routing. ( p. 70)
–
Position the fuel tank and fit the two spoilers to the sides in front of the radiator
bracket.
–
Make sure that no cables or throttle cables are trapped or damaged.
K00556-10
–
Attach the fuel tank breather hose.
–
Mount and tighten screw  with the rubber bushing.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
K00558-11
–
Position the horn with the horn bracket.
–
Mount and tighten screws  with the collar bushings.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
E00509-10
–
Plug in connector

for the fuel pump.
–
Remove the wash cap set.
–
Thoroughly clean the plug-in connection of the fuel line using compressed air.
Info
Under no circumstances should dirt enter into the fuel line. Dirt in the fuel
line clogs the injection valve!
–
Lubricate the O-ring and connect plug-in connection

for the fuel line.
Info
Route the cable and fuel line at a safe distance from the exhaust system.
Finishing work
–
Mount the seat. ( p. 58)
12.33 Checking for chain dirt accumulation
400678-01
–
Check the chain for coarse dirt accumulation.
» If the chain is very dirty:
–
Clean the chain. ( p. 66)