KTM 350 EXC-F 2017, Руководство пользователя

Страница: 58 / 129

12 SERVICE WORK ON THE CHASSIS
56
12.12 Adjusting the steering head bearing play
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 50)
V00454-10
Main work
–
Loosen screws

and

.
–
Loosen and retighten screw

.
Guideline
Screw, top steering head M20x1.5 12 Nm (8.9 lbf ft)
–
Using a plastic hammer, tap lightly on the upper triple clamp to avoid stresses.
–
Tighten screws  .
Guideline
Screw, top triple clamp M8 20 Nm
(14.8 lbf ft)
–
Tighten screw

.
Guideline
Screw, top steering stem M8 20 Nm
(14.8 lbf ft)
Finishing work
–
Check the play of the steering head bearing. ( p. 55)
–
Remove the motorcycle from the lift stand. ( p. 50)
12.13 Lubricating the steering head bearing
800010-10
–
Remove the lower triple clamp. ( p. 53)
–
Install the lower triple clamp. ( p. 53)
12.14 Removing the front fender
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 91)
V00340-10
Main work
–
Remove screws

.
V00341-10
–
Remove screws  . Remove the front fender.