KTM 300 EXC, Руководство по ремонту

Страница: 53 / 289

6 FORK, TRIPLE CLAMP
51
6.2.25 Removing the lower triple clamp
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 10)
–
Remove the front wheel. ( p. 93)
–
Remove the headlight mask with the headlight. ( p. 89)
–
Remove the fork legs. ( p. 34)
–
Remove the front fender. ( p. 89)
–
Remove the handlebar cushion.
602734-10
Main work
–
Remove screw
1
. Remove screw
2
, take off the upper triple clamp with the han-
dlebar, and set it aside.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
602735-10
–
Remove O-ring
3
. Remove protective ring
4
.
–
Take out the lower triple clamp with the steering stem.
–
Take out the upper steering head bearing.
6.2.26 Installing the lower triple clamp
B01218-10
Main work
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease ( p. 270)
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
–
Check whether the top steering head seal
1
is correctly positioned.
–
Slide on protective ring
2
and O-ring
3
.
602736-10
–
Position the upper triple clamp with the steering.
–
Mount screw
4
but do not tighten yet.
–
Position the clutch line and wiring harness.