KTM 300 EXC, Руководство по ремонту

Страница: 121 / 289

17 LIGHTING SYSTEM, INSTRUMENTS
119
400318-01
–
Press the button briefly and repeatedly until H appears at the bottom right of the
display.
–
Press the button for 3 - 5 seconds.
The Setup menu is displayed and the activated functions are shown.
–
Change to the desired function by pressing the button briefly.
The selected function flashes.
Activating a function
–
Press the button .
The symbol remains on the screen and the display changes to the next
function.
Deactivating the function
–
Press the button .
The symbol on the screen goes out and the display changes to the next
function.
–
All desired functions are activated or deactivated accordingly.
–
Press the button for 3 - 5 seconds.
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
17.3.5 Setting the clock
Condition
The motorcycle is stationary.
400330-01
–
Press the button briefly and repeatedly until CLK appears at the bottom right of
the display.
–
Press the button for 3 - 5 seconds.
The hour display flashes.
–
Set the hour display with the button and/or button .
–
Press the button briefly.
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the hours by pressing
the button
and the button .
Info
The seconds can only be set to zero.
–
Press the button for 3 - 5 seconds.
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
17.3.6 Activating the additional functions
Danger
Voiding of the government approval for road use and the insurance coverage The vehicle is only authorized for operation on pub-
lic roads in the homologated version.
–
If the vehicle is modified in any way, it may only be used on designated tracks away from public roads. Advise the vehicle
owner and rider of this.
–
If you undertake any modifications, please insist on receiving a signed workshop order from your customer in which you
inform the customer in writing that these modifications are performed at the customer's own risk and that the vehicle will
no longer be approved for use on public roads once modified.
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 89)