6
CONTROLS
14
6.12
Cold start button
M00777-10
The cold start button
(yellow) is fitted on the bottom of the throttle valve body.
The injection system extends the injection time if the engine is cold and the outside
temperature is low. To help the engine burn the increased amount of fuel, it must be
supplied with additional oxygen by pushing the cold start button.
When the throttle grip is turned, the cold start button jumps back to the original posi-
tion.
Info
Check whether the cold start button has returned to the basic position.
Possible states
• The cold start button is activated
–
The cold start button is pushed in all the way.
• The cold start button is deactivated
–
The cold start button is in its basic position.
6.13
Idle speed adjusting screw
M00778-10
The idle setting of the throttle valve body has a big influence on the vehicle's starting
behavior, on stable idling, and on vehicle response when the throttle is opened. This
means that an engine with a correctly set idle speed is easier to start than if the idle is
set wrongly.
The idle speed is adjusted with the idle speed adjusting screw
.
Increase the idle speed by turning the idle speed adjusting screw clockwise.
Decrease the idle speed by turning the idle speed adjusting screw counterclockwise.
6.14
Shift lever
401950-10
Shift lever
is mounted on the left side of the engine.
