KTM 250 SX 2019, Руководство пользователя

Страница: 45 / 158

TUNING THE CHASSIS 10
43
402415-10
Main work
–
Position the sag gauge in the rear axle and measure the
distance to marking
SAG
on the rear fender.
Sag gauge (00029090000)
Pin for sag gauge (00029990010)
–
Note down the value as dimension
A
.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 52)
10.8 Checking the static sag of the shock absorber
402416-10
–
Measure dimension
A
of rear wheel unloaded. ( p. 42)
–
Hold the motorcycle upright with the aid of an assistant.
–
Again measure the distance between the rear axle and mark-
ing
SAG on the rear fender using the sag gauge.
–
Note down the value as dimension
B
.
Info
The static sag is the difference between
measurements
A
and
B
.
–
Check the static sag.
Static sag (250 SX EU) 35 mm (1.38 in)
Static sag (250 SX US) 35 mm (1.38 in)
Static sag (All XC models) 35 mm (1.38 in)
» If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber.
(
p. 44)