KTM 250 EXC-F 2019 Скачать руководство пользователя

Страница: 26 / 48

3 WORK

3.9

Installing the front wheel

Warning

Danger of accidents

Oil or grease on the brake discs reduces the braking effect.

–

Always keep the brake discs free of oil and grease.

–

Clean the brake discs with brake cleaner when necessary.

H00935-10

–

Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:

–

Change front wheel bearing.

–

Clean and grease shaft seal rings

and contact surface

of the spacers.

Long-life grease (

p. 45)

–

Insert the spacers.

–

Clean and grease the wheel spindle.

Long-life grease (

p. 45)

–

Position the front wheel and insert the wheel spindle.

The brake linings are correctly positioned.

V00364-11

–

Mount and tighten screw

Guideline

Screw, front wheel
spindle

M20x1.5

35 Nm (25.8 lbf ft)

–

Operate the hand brake lever several times until the brake lin-
ings are seated correctly against the brake disc.

–

Remove the motorcycle from the lift stand. (

p. 19)

–

Operate the front brake and compress the fork a few times
firmly.

The fork legs straighten.

–

Tighten screws

Guideline

Screw, fork stub

15 Nm (11.1 lbf ft)

3.10

Installing front fender

V00340-10

Main work
(EXC

‑

F EU/AU/US/AR/BR)

–

Position front fender. Mount and tighten screws

Guideline

Remaining screws,
chassis

10 Nm (7.4 lbf ft)

Содержание 250 EXC-F 2019

















































Результаты поиска

Содержание 250 EXC-F 2019

Отзывы:

Похожие инструкции для 250 EXC-F 2019

Бренды по названию

Популярные бренды

KTM 250 EXC-F 2019, Инструкции по установке

Результаты поиска

Содержание 250 EXC-F 2019

Отзывы:

Похожие инструкции для 250 EXC-F 2019

Бренды по названию

Популярные бренды