KTM 2015 RC 390 ASIA Скачать руководство пользователя

Страница: 153 / 196

SERVICE WORK ON THE ENGINE

151

18.1

Checking the engine oil level

Condition

The engine is at operating temperature.

Preparatory work

–

Stand the motorcycle upright on a horizontal surface.

L02257-10

Main work

–

Check the engine oil level.

Info

After switching off the engine, wait one minute before checking the level.

The engine oil must be between the lower and upper edge of the oil level viewer.

» If the engine oil level is not at the specified level:

–

Add the engine oil. (

p. 154)

18.2

Changing the engine oil and oil filter, cleaning the oil screens

Warning

Danger of scalding

Engine oil and gear oil get very hot when the motorcycle is ridden.

–

Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Содержание 2015 RC 390 ASIA





































































































































































































Результаты поиска

Содержание 2015 RC 390 ASIA

Отзывы:

Похожие инструкции для 2015 RC 390 ASIA

Бренды по названию

Популярные бренды

KTM 2015 RC 390 ASIA, Руководство пользователя

Результаты поиска

Содержание 2015 RC 390 ASIA

Отзывы:

Похожие инструкции для 2015 RC 390 ASIA

Бренды по названию

Популярные бренды