7
SPEEDOMETER
27
7.1.20
Display mode SPEED/A2 (average speed 2)
400326-01
–
Press the button
briefly and repeatedly until
A2
appears at the top right of the
display.
A2
(average speed 2) shows the average speed on the basis of the current speed if the
stop watch
S2
(stop watch 2) is running.
Info
The displayed value can differ from the actual average speed if
S2
is not
stopped after the ride.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
Displays of
TR2
,
A2
and
S2
are reset to 0,0.
Press the button
briefly.
Next display mode
7.1.21
Display mode SPEED/S1 (stop watch 1)
400327-01
–
Press the button
briefly and repeatedly until
S1
appears at the top right of the
display.
S1
(stop watch 1) displays the journey time on the basis of
TR1
and continues when an
impulse is received from the wheel speed sensor.
The calculation of this value starts with the first impulse of the wheel speed sensor and
ends 3 seconds after the last impulse.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
Displays of
TR1
,
A1
and
S1
are reset to 0.0.
Press the button
briefly.
Next display mode
7.1.22
Display mode SPEED/S2 (stop watch 2)
400328-01
–
Press the button
briefly and repeatedly until
S2
appears at the top right of the
display.
S2
(stop watch 2) is a manual stop watch.
If
S2
is running in the background, the
S2
display flashes in the speedometer display.
Press the button . Starts or stops
S2
.
Press the button . No function
Press the button
for 3 - 5 seconds.
Displays of
S2
and
A2
are reset to 0.0.
Press the button
briefly.
Next display mode
7.1.23
Table of functions
Display
Press the button .
Press the button .
Press the button
for 3 -
5 seconds.
Press the button
briefly.
Display mode
SPEED/H
(service hours)
No function
No function
The display changes to
the Setup menu of the
speedometer functions.
Next display mode
Setup menu
Activates the flashing
display
Deactivates the flashing
display
Setup menu starts,
stores the settings, and
changes to
H
or
ODO
.
Changes to the next dis-
play without changes
Unit of measurement
menu
Starts selection, acti-
vates
Km/h
display
Activates
Mph
display
Saves and closes the
Setup menu
Changes to the next
display, changes from
selection to the Setup
menu
Display mode
SPEED/CLK
(time)
No function
No function
The display changes to
the Setup menu of the
clock.
Next display mode
