KTM 2010 990 Super Duke R Скачать руководство пользователя страница 93

Страница: 93 / 198

MAINTENANCE WORK ON FRAME AND ENGINE

B00186-01

–

Check the brake linings for minimum thickness



Minimum thickness



≥

1 mm (

≥

0.04 in)

» If the minimum thickness is less than specified:

–

Change the rear brake linings.

–

Check the brake linings for damage and cracking.
» If damage or wear is encountered:

–

Change the rear brake linings.

9.34

Removing the front wheel

–

Jack up the motorcycle at the rear. (

p. 61)

–

Jack up the motorcycle at the front. (

p. 60)

B00244-10

–

Remove the screws



from both brake calipers.

–

Press back the brake linings with a light lateral tilting of the brake calipers on the brake
disc. Pull the brake calipers carefully back from the brake discs and hang them to one
side.

Info

Do not pull the hand brake lever when the brake calipers are removed.

Содержание 2010 990 Super Duke R







































































































































































































Результаты поиска

Содержание 2010 990 Super Duke R

Отзывы:

Бренды по названию

Популярные бренды

KTM 2010 990 Super Duke R, Руководство пользователя

Результаты поиска

Содержание 2010 990 Super Duke R

Отзывы:

Бренды по названию

Популярные бренды