KTM 2009 690 Rally Factory Replica, Руководство пользователя

Страница: 56 / 104

MAINTENANCE WORK ON CHASSIS AND ENGINE
54
–
Check the depth of the tread.
Info
Note local national regulations concerning the minimum tread depth.
Minimum tread depth
≥
2 mm (
≥
0.08 in)
» If the tread depth is less than the minimum permissible depth:
–
Change the tires.
8.57
Checking tire air pressure
Info
Low tire air pressure leads to abnormal wear and overheating of the tire.
Correct tire air pressure ensures optimal riding comfort and maximum tire service life.
–
Remove dust cap.
–
Check tire air pressure when tires are cold.
Tire air pressure off road
Front 1.0… 1.5 bar (15… 22 psi)
Rear 1.0… 1.5 bar (15… 22 psi)
Tire air pressure on road
Front 1.5 bar (22 psi)
Rear 1.5 bar (22 psi)
» If the tire pressure does not meet specifications:
–
Correct tire pressure.
–
Mount dust cap.
8.58
Checking spoke tension
Warning
Danger of accidents Unstable riding behavior due to loose spokes.
–
If you ride with loose spokes, the spokes can break. Have the spoke tension corrected in an authorized KTM workshop.
Info
A loose spoke can cause wheel imbalance, which leads to more loose spokes in a short time.
If the spokes are too tight, they can break due to local overload.
Check the spoke tension regularly, especially on a new motorcycle.
–
Check spokes for tightness.
Guideline
Spoke nipple, front wheel M5 5 Nm (3.7 lbf ft)
Spoke nipple, rear wheel M5 5 Nm (3.7 lbf ft)
8.59
Removing the trim
600080-10
–
Loosen the plug-in connectors on the flasher cables

.