KTM 2009 690 Rally Factory Replica, Руководство пользователя, Страница: 62 / 104

MAINTENANCE WORK ON CHASSIS AND ENGINE
60
600073-11
–
Mount and tighten screws

.
Guideline
Screw, motor guard M8 25 Nm
(18.4 lbf ft)
8.69
Checking the headlamp setting
0 0 B B
0 0 A A
400408-10
–
On a light-colored wall in front of which there is a horizontal surface, make a mark
at the height of the center of the low beam headlamp.
–
Make another mark at a distance

below the first mark.
Guideline
Distance

5 cm (2 in)
–
Position yourself with the motorcycle at a distance

in front of the wall and
switch the low beam on.
Guideline
Distance

5 m (16 ft)
–
Check the headlamp setting.
For a ready-to-operate motorcycle with a rider, the light-dark boundary must lie
exactly on the lower mark.
» If the light-dark boundary does not meet specifications:
–
Adjust the headlamp. ( p. 60)
8.70
Adjusting the headlamp
–
Remove the trim. ( p. 54)
0 0 B B
0 0 A A
400408-10
–
On a light-colored wall in front of which there is a horizontal surface, make a mark
at the height of the center of the low beam headlamp.
–
Make another mark at a distance

below the first mark.
Guideline
Distance

5 cm (2 in)
–
Position yourself with the motorcycle at a distance

in front of the wall and
switch the low beam on.
Guideline
Distance

5 m (16 ft)
600102-10
–
Loosen screws

and

. Swivel the headlamp bracket

and headlamp of the
ready-to-operate motorcycle with a rider until the light-dark boundary lies exactly
on the lower mark.
–
Tighten screws

and

.
–
Mount the trim. ( p. 55)