KTM 2009 690 Rally Factory Replica, Руководство пользователя, Страница: 36 / 104

MAINTENANCE WORK ON CHASSIS AND ENGINE
34
600095-10
–
Tighten screw

.
Guideline
Screw, bottom shock
absorber M10 45 Nm
(33.2 lbf ft) Loctite ® 243™
600097-11
–
Position the splash protector

. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Remove the motorcycle from the work stand. ( p. 29)
8.15
Checking basic setting of fork
Info
For various reasons, no exact riding sag can be determined for the forks.
400189-01
–
As with the shock absorber, smaller weight differences can be compensated by the
spring preload.
–
However, if your fork is often overloaded (hard end stop on compression), you must
fit harder springs to avoid damage to the fork and frame.
8.16
Adjusting the compression damping of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.
600049-10
–
Turn adjusting screws

clockwise until they stop.
Info
Adjusting screws

are located at the top end of the fork legs.
Make the same adjustment on both fork legs.
–
Turn back counterclockwise the number of clicks corresponding to the fork type.
Guideline
Compression damping
Standard 12 clicks
Info
Turn clockwise to increase damping, turn counterclockwise to reduce sus-
pension damping.