KTM 200 DUKE 2021 Скачать руководство пользователя страница 85

Страница: 85 / 119

COOLING SYSTEM 16

G05016-11

–

Stand the motorcycle upright on a horizontal surface.

–

Remove the cap of the compensating tank

–

Check the coolant antifreeze.

−

25 …

−

45 °C (

−

13 …

−

49 °F)

» If the antifreeze in the coolant does not match the speci-

fied value:

–

Correct the coolant antifreeze.

–

Check the coolant level in the compensating tank.

The coolant level must be between

MIN

and

MAX

» If the coolant level does not match the specified value:

–

Correct the coolant level.

Coolant (

p. 107)

–

Mount the cap of the compensating tank.

G05017-10

–

Remove radiator cap

–

Check the coolant antifreeze.

−

25 …

−

45 °C (

−

13 …

−

49 °F)

» If the antifreeze in the coolant does not match the speci-

fied value:

–

Correct the coolant antifreeze.

–

Check the coolant level in the radiator.

The radiator must be completely filled.

» If the coolant level does not match the specified value:

–

Correct the coolant level and find out the cause of the
loss.

Coolant (

p. 107)

» If you had to add more coolant than the specified amount:

> 0.20 l (> 0.21 qt.)

–

Fill/bleed the cooling system.

(

p. 84)

–

Mount the radiator cap.

16.4

Draining the coolant

Warning

Danger of scalding

During motorcycle operation, the coolant gets very hot and is under pressure.

–

Do not open the radiator, the radiator hoses or other cooling system components if the engine or the
cooling system are at operating temperature.

–

Allow the cooling system and the engine to cool down before you open the radiator, the radiator hoses
or other components of the cooling system.

–

In the event of scalding, rinse the area affected immediately with lukewarm water.

Содержание 200 DUKE 2021
























































































































Результаты поиска

Содержание 200 DUKE 2021

Отзывы:

Бренды по названию

Популярные бренды

KTM 200 DUKE 2021, Руководство пользователя

Результаты поиска

Содержание 200 DUKE 2021

Отзывы:

Бренды по названию

Популярные бренды