KTM 1290 SUPER ADVENTURE R 2017 Скачать руководство пользователя страница 72

Страница: 72 / 274

COMBINATION INSTRUMENT

7.22.8

Telephony (optional)

F00968-01

Condition

•

KTM MY RIDE

Function activated (optional).

• Similarly, the

Bluetooth

function should also be activated in the device to be paired.

• Headset linked with appropriate cellphone.

Warning

Danger of accidents

Headphone volume which is too high distracts attention

from traffic activity.

–

Always select headphone volume which is low enough for you to still clearly
hear acoustic signals.

–

Press the

SET

button to accept an incoming call.

–

Press the

BACK

button to reject an incoming call.

–

Press and hold the

button to increase the audio volume.

–

Press and hold the

DOWN

button to reduce the audio volume.

Info

The call duration and contact are displayed. Depending on the cellphone
settings, the contact is shown by name.

Содержание 1290 SUPER ADVENTURE R 2017



















































































































































































































































































Результаты поиска

Содержание 1290 SUPER ADVENTURE R 2017

Отзывы:

Бренды по названию

Популярные бренды

KTM 1290 SUPER ADVENTURE R 2017, Руководство пользователя

Результаты поиска

Содержание 1290 SUPER ADVENTURE R 2017

Отзывы:

Бренды по названию

Популярные бренды