KTM 125 SX EU 2015, Руководство пользователя

Страница: 84 / 129

15 COOLING SYSTEM
82
B02123-11
(125/150 SX)
–
Remove screw

. Take off radiator cap

.
–
Completely drain the coolant.
–
Mount and tighten screw

with a new seal ring.
Guideline
Drain plug, water pump cover M10x1 15 Nm
(11.1 lbf ft)
B02124-11
(All 250/300 models)
–
Remove screw

. Take off radiator cap

.
–
Completely drain the coolant.
–
Mount and tighten screw

with a new seal ring.
Guideline
Drain plug, water pump cover M10x1 15 Nm
(11.1 lbf ft)
15.8 Refilling with coolant
x
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
–
Coolant must not come into contact with the skin, eyes, or clothing. If contact occurs with the eyes, rinse with water imme-
diately and contact a physician. Immediately clean contaminated areas on the skin with soap and water. If coolant is swal-
lowed, contact a physician immediately. Change clothing that is contaminated with coolant. Keep coolant out of reach of
children.
B02125-10
(125/150 SX)
–
Make sure that screw

is tightened.
B02126-10
(All 250/300 models)
–
Make sure that screw

is tightened.
B02127-10
–
Position the motorcycle upright.
–
Fill the radiator completely with coolant.
Coolant 1.2 l (1.3 qt.) Coolant ( p. 119)
Coolant (mixed ready to use)
( p. 119)
–
Mount radiator cap

.
–
Run the engine until it is warm.
–
Check the coolant level. ( p. 81)