KTM 125 SX EU 2015, Руководство пользователя

Страница: 63 / 129

11 SERVICE WORK ON THE CHASSIS
61
11.46 Changing the hydraulic clutch fluid
x
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
L00953-10
(125/150 SX)
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal posi-
tion.
–
Remove screws

.
–
Remove cover

with membrane

.
B02109-10
–
Fill bleeding syringe

with the appropriate hydraulic fluid.
Bleed syringe (50329050000)
Hydraulic fluid (15) (
p. 120)
–
On the slave cylinder of the clutch, remove bleeder screw

and mount bleed-
ing syringe

.
L00953-11
–
Inject the liquid into the system until it escapes from bore hole

of the mas-
ter cylinder without bubbles.
–
To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
–
Remove the bleeding syringe. Mount and tighten the bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level under top level of con-
tainer 4 mm (0.16 in)
–
Position the cover with the membrane. Mount and tighten the screws.
L01222-10
(250 SX EU, 250 SX US)
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal posi-
tion.
–
Remove screws

.
–
Remove cover

with membrane

.
B02110-10
–
Fill bleeding syringe  with the appropriate hydraulic fluid.
Bleed syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
p. 119)
–
On the slave cylinder of the clutch, remove bleeder screw

and mount bleed-
ing syringe

.