KTM 125 EXC 2015, Инструкции по установке

Страница: 18 / 24

3 WORK
16
–
Switch off the engine.
–
Open the filler cap. ( p. 15)
400382-10
–
Fill the fuel tank with fuel up to measurement

.
Guideline
Measurement of

35 mm (1.38 in)
Total fuel tank
capacity, approx.
(EXC EU,
EXC SIX DAYS,
300 EXC BR) 9.5 l
(2.51 US gal) Super unleaded (95 octane) mixed
with 2-stroke engine oil (1:60)
( p. 19)
Total fuel tank
capacity, approx.
(EXC AU, XC
‑
W,
XC-W SIX DAYS)
10 l (2.6 US gal) Super unleaded (95 octane) mixed
with 2-stroke engine oil (1:60)
( p. 19)
Engine oil, 2-stroke ( p. 19)
–
Close the filler cap. ( p. 15)
3.18 Setting kilometers or miles
Info
If you change the unit, the value ODO is retained and converted accordingly.
The values TR1 , TR2 , A1 , A2 and S1 are cleared when the unit of measure is changed.
Condition
The motorcycle is stationary.
400329-01
–
Repeatedly press the button briefly until H appears at the bottom right of the
display.
–
Press the button for 2
–
3 seconds.
The Setup menu is displayed and the active functions are shown.
–
Repeatedly press the button briefly until Km/h / Mph flashes.
Setting the Km/h
–
Press the button .
Setting the Mph
–
Press the button .
–
Wait 3
–
5 seconds
The settings are stored.
Info
If no button is actuated for 10
–
12 seconds or there is no signal from the
wheel speed sensor, then the settings are automatically stored and the
Setup menu is closed.
3.19 Setting the speedometer functions
Info
When the vehicle is delivered, only the
SPEED/H
and
SPEED/ODO
display modes are activated.
Condition
The motorcycle is stationary.
400318-01
–
Repeatedly press the button briefly until H appears at the bottom right of the
display.
–
Press the button for 2
–
3 seconds.
The Setup menu is displayed and the active functions are shown.