KTM 1190 RC8 AUS, Руководство пользователя

Страница: 140 / 250

MAINTENANCE WORK ON FRAME AND ENGINE
138
100714-10
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Loosen screw.
–
Remove cap

with membrane

.
–
Add brake fluid to the MAX level.
Brake fluid DOT 4 / DOT 5.1 ( p. 235)
–
Position the cap with the membrane. Mount and tighten the screws.
Info
Clean up overflowed or spilt brake fluid immediately with water.
9.37
Brake linings
The brake linings fitted by KTM have been tested over long periods and guarantee optimal braking characteristics. The type names of the
brake linings are entered in the homologation documents.
Info
Brake linings available from accessory suppliers are often not tested and approved for use on KTM vehicles. The construction and
friction factor of the brake linings and therefore the brake power can differ considerably from the original KTM brake linings. If
brake linings are used that differ from the originals, there is no guarantee that they comply with the original license. The vehicle
no longer corresponds to the condition at delivery, and the warranty is no longer valid.
9.38
Checking the front brake linings
Warning
Danger of accidents Reduced braking efficiency caused by worn brake linings.
–
Change worn brake linings immediately. (Your authorized KTM RC8 workshop will be pleased to help.)