KTM 1190 Adventure R EU Скачать руководство пользователя страница 224

Страница: 224 / 238

SUBSTANCES

222

Shock absorber fluid (SAE 2.5) (50180751S1)

Standard/classification

–

SAE (

p. 225) (SAE 2.5)

Guideline

–

Use only oils that comply with the specified standards (see specifications on the container) and that exhibit the corresponding proper-
ties.

Super unleaded (ROZ 95/RON 95/PON 91)

Standard/classification

–

DIN EN 228 (ROZ 95/RON 95/PON 91)

Guideline

–

Only use unleaded super fuel that matches or is equivalent to the specified fuel grade.

–

Fuel with an ethanol content of up to 10 % (E10 fuel) is safe to use.

Info

not

use fuel containing methanol (e. g. M15, M85, M100) or more than 10 % ethanol (e. g. E15, E25, E85, E100).

Содержание 1190 Adventure R EU















































































































































































































































Результаты поиска

Содержание 1190 Adventure R EU

Отзывы:

KTM 1190 Adventure R EU, Руководство пользователя, Страница: 224 / 238

Результаты поиска

Содержание 1190 Adventure R EU

Отзывы: