background image

M143-HD38M-002

HDcctv

Digital Video Camera

OPERATION MANUAL

Thank you for choosing our high quality camera. Before attempting 

to connect or operate, please read and follow these instructions.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European 

countries with separate collection systems)

This marking shown on the product or its literature, indicate that 

it should not be disposed with other household wastes at the end 

of its working life. To prevent possible harm to the environment or 

human health from uncontrolled waste disposal, please separate 

this from other types of wastes and recycle it responsibly to 

promote the sustainable reuse of material resources.

This product should not be mixed with other commercial wastes 

purchased this product, or their local government office, for details 

of where and how they can take item for environmentally safe 

recycling.

Business users should contact their supplier and check the terms 

and conditions of the purchase contract.

Household users should contact either the retailer where they for 

disposal.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 

NOT REMOVE COVER(OR BACK). NO USER. 

SERVICING TO QUALIFED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence 

of uninsulated "dangerous voltage" within the product's 

enclosure that may be of sufficient mangnitude to constitute a 

risk of electric shock to persons.

This symbol is intended to alert the user to the presence of 

important operating and maintenance(servicing) instruction in 

the literature accompanying the appliance.

CAUTIONS

MOUNTING POSITION

DIMENSIONS

CONNECTION

Machine Screw:

M2 x 2.5(4ea)

CAUTION !

Please start installing 

in the order shown.

Mounting 

Bracket

Camera

Tapping Screw:

ø3 x 8(2ea)

ø23

ø14

19.4

19.4

APPROX.33

APPROX.24

38.5

38.5

29

Unit: mm

SPECIFICATION

This device complies with Part 15 of the FCCRules. Operation is 

subject to the following two conditions;

1. This device may not cause harmful interference.

2. This device must accept any interference received,  including 

    interference that may cause undesired operation.

Note -

This equipment has been tested and found to comply with the limits for a Class A 

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference when the equipment is 

operated in a commercial environment. This equipment generates, uses, and can 

radiate radio frequency energy and, if not installed and used in accordance with 

the instruction manual, may cause harmful interference to radio communications. 

Operation of this equipment in a residential area is likely to cause harmful 

interference in which case the user will be required to correct the interference at 

his own expense.” 

WARNING -

This is a class A product. In a domestic environment this product may cause radio 

interference in which case the user may be required to take adequate measures.

Caution -

Any changes or modifications in construction of this devices which are not 

expressly approved by the party responsible for compliance could void the user's 

authority to operate the equipment.

 

CAUTION

 

1. A regulated DC12V 300mA power supply is recommended for use 

with this camera for the best picture and the most stable operation.

An unregulated power supply can cause damage to the camera.

When unregulated power supply is applied, product warranty will 

be out of subject.

2. It is recommended that the camera is used with a monitor that has a 

CCTV quality 75 video impedance level. If your monitor is switched to 

high impedance then please adjust accordingly.

3. Do not attempt to disassemble the camera to gain access to the 

internal componets. Refer servicing to your dealer.

4. Never face the camera towards the sun or any bright or reflective 

light, which may cause smear on the picture and possible damage to 

the CCD.

5. Do not remove the serial sticker for the warranty service.

6. Do not expose the camera to rain or other types of liquid.

7.The apparatus must be connected to a mains socket-outlet with a 

protective earthing connection.

EQUIPMENT AND ACCESSORIES

Camera

Mounting 

Bracket

Screw

Machine Screw

M2x2.5(4ea)

Tapping Screw

ø3 x 8(2ea)

Operation 

Manual

Cable

Service Video 

Output Test Cable

DIY Cable

CAUTION

• When you connect Service Video Output

Cable WDR function does not work.

• Service Video Output looks the angle of 

view narrower than HD-SDI Output.

Image Device

1/3” 2.1 Mega Pixel SONY CMOS

Pixel Size

2.8um(H) x 2.8um(V)

Effective Pixels

1984(H) x 1105(V)

Manual Shutter

1/30(25), 1/60(50), 1/120(100), 1/250, 1/700, 1/1K, 

1/1.6K, 1/2.5K, 1/5K, 1/7K, 1/10K, 1/30K

Sense-up

x 2, x 3, x4

AGC

0dB ~ 23dB

White Balance

AUTO / Manual / PUSH LOCK

Sensitivity

0.1 Lux

S/N Ratio

More than 50dB

Video Output

HD-SDI / CVBS

Day & Night

Digital D&N (AUTO / COLOR / BW)

LENS

Board Lens, Pinnole Lens

Dimension

38.5mm(H)  x  38.5mm(V) 

Weight

Approx. 80g

ETC.

Motion Detection, 3DNR, Mirror(H,V,H/V),

Digital Zoom, BLC, WDR, OSD(JOYSTICK)

Power

Consumption

DC12V[±10%], MAX 160mA

Operating 

Temperature

14˚F~122˚F (-10˚C~+50˚C)

Storage 

Temperature

-4˚F~140˚F (-20˚C~+60˚C)

External 

Control

RS-485

Specifications and designs are subject to change for 

improving the functionality of this product without notice.

Handheld 

Monitor

OSD Control Joystick

HD-SDI 

Power / RS485

Service Video Connector

HD-SDI IN

RS485

Power Jack
(DC12V)

Отзывы: