23
0T
Charger-status
graphics
section
0T
Display the status of the charger.
0T
When charger works normally, the
corresponding
icon
will
vary
dynamically and orderly.
0T
when charger works abnormally, the
icon will keep flashing
0T
When UPS is in battery mode, the
number of the icons of the
charger-state
section
will
vary
according to the changeable capacity
of the battery (pane).
Parameters inquiring
0T
Press and hold the scroll key
or
for more than half a second(less than 2 seconds) to inquire
about items. The inquired items include input, battery, output, load, temperature.。Press and hold the
scroll key
for more than 2 seconds, LCD begins to display the items circularly and orderly which
transfer to another every 2 seconds. Press and hold the key for some time again, it will return to
output status.
Table 5. Parameters inquiring
0T
Item
0T
Description
0T
Graphic
0T
Output
0T
Display the output voltage and
output frequency of the UPS. As the
following graphic shown, the
output voltage is 230v & the output
frequency is 50Hz.
0T
Load
0T
Display the numerical value of the
active power(WATT) and apparent
power(VA) of the load. For example,
as the following graphics shown:
the WATT of the load is 100w, VA is
100VA (when disconnect load, it is a
normal phenomenon to show a
small numerical value of WATT and
VA).
