TRACKSO INSTALLATION GUIDE FOR KSTAR
Brand:
Kstar
Type:
Solar On Grid String Inverter
Models:
KSG-DM 10kW |1 2kW | 15kW| 17kW| 20kW , KSG-TM 30kW | 50kW | 60kW
CONNECTION DIAGRAM
The communication terminals (RS485) are located at the bottom of the inverter. And there are two
connection terminals on the configuration circuit board: ++ - - terminal blocks.
Figure K1:A– Kstar Sring Inverter communicatio port & Connections
Connection steps
Please unscrew the RS485 terminal as shown in A part of Figure K1.
Please make the connections from the Terminal Block to TrackSo IoT Gateway as mentioned in Table – KT1.
Table KT1 – Kstar RS485 chip connections with
TrackSo IoT Gateway
RS485 Out- Used in case of Multiple Inverter Connection (Daisy chain).
Kstar
Pin No.
Kstar
Assignment
TrackSo Pin
No.
TrackSo
Assignment
1
(A)
R/T+
3
D+
2
(A)
R/T+
RS485 Out
3
(B)
R/T-
4
D-
4
(B) R/T-
RS485 Out
