code R30043.110en www.kseniasecurity.com
ed.12/2020
FIRST START
Remove the protective transparent film placed on the touchscreen.
To switch on the device, press the <ON/OFF> button for five seconds (see paragraph “Product description”).
Once the startup phase has finished, you can open App lares 4.0 for ergo-T / ergo-T plus.
At this point, from the "Installer" configuration program, open the menu <IP Devices -> ergo-T> where, if
properly powered and connected to the motherboard, the keypad will appear as shown in the following
image, the acquisition is immediate, you have to save and apply the configuration session:
Once the configuration to the control panel has been sent, the page appears as shown in the following
image and the App lares 4.0 will restart automatically on the keypad.
