manualshive.com logo in svg

KSB SRA, Инструкция по установке и эксплуатации

Поделиться
Скачать
KSB SRA Скачать руководство пользователя страница 20

4 Description

20 of 62

SRA

2334.810/03-EN

version.
For installation under traffic areas the collecting tank can be fitted with a manhole
cover ring (2).

Function

The fluid handled enters the collecting tank via the inlet connection (6) and collects
in the tank. A screen basket (5) filters coarse solids out of the fluid handled. When
the set fill level is reached, the sensor system (13) sends a signal to the control unit
(19), and the submersible motor pumps (7) are started up. The submersible motor
pumps transport the fluid handled out of the collecting tank through the discharge
connection (11). To distribute the load evenly between the pump sets used, pumps
are automatically alternated after each drain cycle by the control unit.

4.7 Scope of supply

See data sheet.

4.8 Dimensions and weights

For dimensions and weights see the data sheet or type series booklet.

4.9 Accessories

See data sheet.

Содержание SRA































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды