12
EC Declaration of Conformity
Manufacturer:
KSB Aktiengesellschaft
Johann-Klein-Straße 9
67227 Frankenthal (Germany)
The manufacturer herewith declares that the product:
Hya-Solo DV
KSB order number: ...................................................................................................
▪
is in conformity with the provisions of the following directives as amended from time to time:
– Machinery Directive 2006/42/EC
– Electromagnetic Compatibility Directive 2004/108/EC
The manufacturer also declares that
▪
the following harmonised international standards were applied:
– ISO 12100-1/A1, ISO 12100-2/A1,
– ISO 14121-1,
– EN 809/A1,
– EN 60204-1,
– EN 61800-3
▪
Applied national technical standards and specifications, in particular:
– DIN 1988-5
Responsible for compiling the technical documentation:
Name: Dr. Frank Obermair
Address: Johann-Klein-Straße 9
67227 Frankenthal
Frankenthal, 29 December 2009
...........................................................
Name
Function
Responsible for compiling the technical documentation
KSB Aktiengesellschaft
Johann-Klein-Straße 9
67227 Frankenthal (Germany)
CE conformity marking
The product is CE-marked and fulfils the requirements specified for category C2 in the EN 61800-3 product
standard. Use of the product in the first environment is, therefore, in the sole discretion of the operator. An
electromagnetic compatibility assessment should in individual cases be performed by the operator beforehand as
electromagnetic disturbance may occur in the first environment.
The product fulfils the requirements of IEC 61000-3-12 provided that the short circuit current SSC at the interface
between the customer’s system and the mains power supply is sufficient or that additional measures of
interference suppression (RF chokes) have been taken to remain within the permissible limits.
The installer or operator of the product shall be responsible for ensuring that the product is only connected to a
mains power supply interface with sufficient SSC or that additional interference suppression measures have been
taken. If required, the installer or operator of the product shall consult the mains operator.
12 EC Declaration of Conformity
Hya®-Solo DV
51 of 56
