KSB Guard, Инструкция по установке и эксплуатации

Страница: 28 / 40

8 Dismantling
28 of 40
KSB Guard
8 Dismantling
WARNING
Incorrect dismantling
Crushing, impact injuries, cuts!
▷ Use suitable tools only.
▷ Wear suitable protective equipment.
8.1 Dismantling the gateway
DANGER
Risk of falling when working at a great height
Danger to life by falling from a great height!
▷
Do not step onto the pump (set) during installation work or dismantling work.
▷ Pay attention to safety equipment, such as railings, covers, barriers, etc.
▷ Observe the applicable local health and occupational safety regulations and
accident prevention regulations.
DANGER
Improper work on electrical connection
Electric shock!
▷ The gateway may only be opened by a qualified electrical technician.
▷ Electrical work may only be carried out by a qualified electrical technician.
1. Disconnect the power supply.
2. Detach the rear adapter of the gateway from the wall bracket.
3. Remove the wall-mounting bracket from the wall.
8.2 Dismantling the transmission and battery unit
WARNING
Work in the immediate vicinity of rotating parts
Risk of hand injury!
▷ Always have this work performed by trained personnel.
▷
Take particular caution when performing this work.
WARNING
Hot surfaces (Pump and piping take on the temperature of the fluid handled.)
Risk of burns!
▷ Do not touch hot surfaces.
1. Disconnect the connecting cable of the sensor unit.
2. Carefully remove the transmission and battery unit from the installation
location. Use a lever tool if necessary.