KSB Guard, Инструкция по установке и эксплуатации

Страница: 14 / 40

4 Description
14 of 40
KSB Guard
4.6 Sensor unit
1
2
Fig. 5: Sensor unit
1 QR code 2 Connecting cable to transmission
and battery unit
4.7 Transmission and battery unit
1
2
5
6
3
4
Fig. 6: Transmission and battery unit
1 Pushbutton 2 Status LED A
3 Status LED B 4 Level LEDs for indicating the signal
strength of the gateway connection
5 Cover for housing screws 6 Connection for connecting cable to
sensor unit
Table 9: Description/ function of control elements and LED indicators
Control element/ LED indicator Description
Pushbutton Commissioning, status check, manual measurement
Status LED A Status LEDs for indicating the operating status and for coded output of fault
messages
Status LED B
Level LEDs Signal strength of the gateway connection