2 Safety
5 of 12
Compacta / mini-Compacta
2 Safety
!
DANGER
All the information contained in this section refers to hazardous situations.
In addition to the present general safety information the action-related safety
information given in the other sections must be observed.
2.1 Key to safety symbols/markings
Table 2:
Definition of safety symbols/markings
Symbol
Description
!
DANGER
DANGER
indicates a high-risk hazard which, if not avoided, will result in
death or serious injury.
!
WARNING
WARNING
indicates a medium-risk hazard which, if not avoided, could result
in death or serious injury.
CAUTION
CAUTION
indicates a hazard which, if not avoided, could result in damage to
the machine and its functions.
General hazard
in conjunction with one of the signal words indicates a hazard
which will or could result in death or serious injury.
Electrical hazard
identifies information about protection against electrical voltage.
In conjunction with the signal word CAUTION, this symbol indicates
a hazard for the machine and its functions.
2.2 General
This supplementary operating manual contains additional applicable information.
General installation, operating and maintenance instructions that must be observed
to ensure safe operation and prevent personal injury and damage to property are
given in the installation/operating manual.
The safety information in all sections of this supplementary operating manual and in
the relevant installation/operating manual must be complied with.
The supplementary operating manual must be read and completely understood by
the responsible specialist personnel/operators.
The contents of this supplementary operating manual must be available to the
specialist personnel at the site at all times.
The operator is responsible for ensuring compliance with all local regulations which
are not taken into account in this supplementary operating manual.
2.3 Intended use
The lifting unit/control unit must only be operated within the operating limits
described in the other applicable documents.
▪
Only operate lifting units/control units which are in perfect technical condition.
▪
Do not operate partly assembled lifting units/control units.
▪
The lifting unit/control unit must only be operated with the fluids described in
the relevant installation/operating manual.
Prevention of foreseeable misuse
▪
Never exceed the permissible operating limits specified in the relevant
installation/operating manual.
▪
Observe all safety information and instructions in this supplementary operating
manual.
