Installation Instructions:
Assembly sequence:
1
Attach sockets to posts with 10mm flange nuts using 15mm wrench.
2
Attach posts to the swing beam as figure 1 displays, using the 17mm wrench and ratchet with
17mm socket.
3
Use the soft headed hammer to close the covers.
4
Place the side plates onto the posts as figure 1 displays and use the ratchet with the 13mm
socket.
Figure 1 displays assembly parts.
Post
Swing beam
Socket
Swings
Side plates
10x120mm Bolts
10,5x20mm Washers
Black covers
10,5x25,5mm Washers
10mm Self locking nuts
10mm Flange nuts
Red covers
8x80mm Wood
8,4x16mm Washers
8x30mm Bolts
8mm Self locking nuts
