Krown The Equalizer K-EQ40, Инструкция по эксплуатации, Страница: 8 / 12

USING THE EQUALIZER
The phone’s 3-band equalizer boosts the sound of three frequency ranges (600 Hz, 1.2
kHz, 2.4 kHz) to compensate for the ear’s limited sensitivity in these ranges. To adjust
the settings, open the cover next to the
EQUALIZER
button (it reads Krown
Manufacturing). Slide each switch toward “+” to increase or amplify sound, or
toward “-” to decrease the sound within that specific range.
To turn on the equalizer, press
EQUALIZER
after you pick up the handset, or at any
time during a call. The indicator below the button lights up to indicate the equalizer
is in use. To turn off the equalizer during a call, press
EQUALIZER
again. The indi-
cator light will turn off when the equalizer is not being used. The equalizer will turn
off automatically once the phone has been hung up.
MEMORY DIALING
Your phone allows you to store two types of number up to 16 digits each for fast
memory dialing:
• Up to three emergency numbers that you can dial by pressing one of the
three priority buttons (the buttons with symbols)
• Up to 10 standard memory numbers that you can dial by pressing
two buttons.
STORING A NUMBER
1. Lift the handset and press
STORE.
2. Enter the phone number you want to store then press
STORE.
Note:
To enter a pause of about three seconds after an access code (9 for
example), dial the access code press
REDIAL , then enter the number.
3. Press to store emergency numbers (for ambulance, police
or fire department) or press one digit (0-9) to store other frequently
dialed numbers. For example, to store the first number as zero you
would lift the handset and press
STORE
. Then enter a number for
example Krown Manufacturing 817-738-2485, press
STORE
again, then
press number 1. “817-738-2485” is now stored as number 1.
6