Krone Vendro 680, Руководство по эксплуатации, Страница: 32 / 104

2 Safety
2.8 Safety equipment
32
Vendro 680
Original operating instructions 150001223_01_en
Pos. Designation Explanation
1 Rear support jack • The support jack is used to keep the machine
stable when it is not connected to the tractor,
see Page 56 .
2 Deflector hoop • The deflector hoop is used to prevent
unintentional contact with the tines and tine
arms.
3 Stop cock/stop cocks • When transporting the machine and when
working under the machine, always close the
stop cock/stop cocks.
4 Overload protection • The overload protection protects the tractor
and the machine from load peaks
„
To avoid damaging the machine, switch off the
PTO shaft if the overload protection responds
for a longer period of time (>1 s).
5 Front support jack • The support jack is used to keep the machine
stable when it is not connected to the tractor,
see Page 56 .
2.8.1 SMV emblem
For the version with “SMV emblem”
KM000-567
The SMV emblem (Slow-Moving Vehicle) (1) can be mounted on slow-moving machines or
vehicles. The country-specific specifications must be observed.
The SMV emblem (1) is at the rear in the centre or on left.
If the machine is transported on transport vehicles (for example lorry or train), the SMV emblem
must be covered or dismounted.