manualshive.com logo in svg

Krone LOAD CARRIER, Руководство по эксплуатации, Страница: 28 / 128

Поделиться
Скачать
Krone LOAD CARRIER Скачать руководство пользователя страница 28

RUNNING GEAR OPERATION

28

Operating instructions • Load Carrier • 505410638-02 • 07/2019

The draw fork can also be optionally
equipped with rapid resetting that requires
no tools.

Adjusting the height of the draw fork

Depending on the equipment, two versions
of the height-adjustment device are pos-
sible.

NOTE

A draw fork set to the wrong height can
cause material damage!

A draw fork set to the wrong height can
cause damage to the trailer or tractor unit
during hitching.

► Before hitching and unhitching, set

the draw fork to the corresponding
height of the tractor unit's trailer coup-
ling.

1

2

Fig. 5-6:

Draw fork with height adjustment
device

1

Draw fork

2

Height adjustment device

Version 1

1

2

3

Fig. 5-7:

Tension spring with turnbuckle

1

Turnbuckle

2

Turnbuckle lever

3

Draw spring

► Use the turnbuckle lever to turn the

turnbuckle until the coupling ring has
reached the required height.

ü

The height of the draw fork is set.

Version 2

2

1

3

Fig. 5-8:

Tension spring with turnbuckle,
version 2

1

Lock nut

2

Turnbuckle

3

Draw fork

► Loosen the lock nut.

► Use the turnbuckle lever to turn the

turnbuckle until the coupling ring has
reached the required height.

Содержание LOAD CARRIER

































































































































Отзывы:

Нет отзывов