Krone EasyCut F 280 Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 96

Krone EasyCut F 280 Скачать руководство пользователя страница 80

Maintenance - Blade Changing

80

Pos: 136.25 /Ü berschriften/Ü berschriften 3/K- O/MMesserschnell verschluss @ 0\mod_1197271019859_78.docx @ 16597 @ 3 @ 1

13.2.2

Blade Quick-Fit Device

Pos: 136.26 /BA/Wartung/M ähwer ke/M esserschr aub / M esserschnellverschluss/Beschr eibung M esser wechsel M esserschnellverschluss @ 0\mod_1197271100500_78.docx @ 16616 @ @ 1

Fig. 47
•  Clean the area.
•  Remove damaged or worn blades.
•  Push the special tool (1) {blade key} between the cutter disc (4) and leaf spring (3) and

press down with one hand.

• Guide a new blade (2) onto the retaining bolt and allow the blade key to return upwards.
• After fitting the blades, fold the protective device down again.

Note

• The cutter blades of anticlockwise rotating cutting discs / blade drums are different than

those of clockwise rotating ones. Make certain the direction of rotation is correct when

installing!

• The arrow on the cutter blades must match the direction of rotation of the corresponding

cutting discs / blade drums.

• The hex nut (4) used to secure the retaining bolts must not be used more than once.

Order No. for clockwise rotating blade: 139-889

Order No. for anticlockwise rotating blade: 139-888

Pos: 136.27 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
78
79
80
81
82
...
»

Содержание EasyCut F 280

































































































Отзывы:

Нет отзывов