Krone EasyCut B 870 CV Collect, Оригинальная инструкция по эксплуатации

Страница: 61 / 122

Settings 10
Setting the lateral links 10.2
EasyCut B 870 CV Collect
Original Operating Instructions 150000707_01_en 61
KMG000-025
ü
The machine is in headland position.
ü The machine is supported safely, refer to page 24 .
ü
The machine is shut down and safeguarded, refer to page 24 .
„
The high-cut skids must always be mounted underneath the cutting discs that run next to the
mower drums.
„
Insert the high-cut skid (2) into the sliding skid (1) and screw it.
10.2 Setting the lateral links
KMG000-024
For mowing set the height of the three-point hitch until the side links (3) in the front area (1) and
in the rear area (2) are at the same height. The setting is made by raising the machine.
„
Raise the machine until the lateral suspension arms (3) are set to X = approx. 0 mm .
10.3 Adjusting the relief spring(s)
WARNING
Risk of injury due to incorrectly set relief spring(s)
If the threaded rod of the relief spring is screwed out too far, the compensation spring may
tear off and the mower may lower unintentionally. People may be seriously injured or killed as
a result.
„ Never unscrew the threaded spindles (2) of the relief springs (1) further than the
dimension X = 80 mm.