Krone EasyCut B 870 CR, Руководство по эксплуатации

Страница: 29 / 108

Safety 2
Safety equipment 2.7
EasyCut B 870 CR
Original Operating Instructions 150000706_01_en 29
5. Ord. no. 27 021 591 0 (1x)
Danger if the regulating valves of the
tractor are not locked
There is a risk of accidents if the regulating
valves of the tractor are not locked.
„
To avoid that functions are triggered by
mistake, the regulating valves of the tractor
must be in neutral position and locked
during road transport journeys.
2.7 Safety equipment
3
1
4 4
2
KMG000-088
Pos. Designation Explanation
1 Stop cocks • When transporting the machine and when
working under the machine, always close the
stop cocks.
2 Support jacks • The support jacks are designed for the stability
of the machine when it is not connected to the
tractor,
refer to page 48 .
3 Road travel lighting • The road travel lighting is used for road safety.
• Before driving on roads, switch on the road
travel lighting and ensure that it functions
properly.
4 Overload protection • The overload protection protects the tractor
and the machine from load peaks
„
To avoid damaging the machine, switch off the
PTO shaft if the overload clutch engages
continuously.