Maintenance
63
Pos : 27.27.28 /BA/Wartung/M ähwer ke/Stoß kanten erneuern @ 0\mod_1197271320468_78.doc @ 16636
10.11
Replacing the linings
Caution!
If the linings are checked irregularly.
Effect: Damage to the machine
•
Always check the mowing unit for damaged linings prior to start-up and
replace linings, if necessary!
•
Adjust the welding current and the welding material to the cutter bar
material and to the lining or carry out a trial welding if necessary.•
EC-0-012
Fig. 34:
•
Open the welding seams of the old lining.
•
Remove the lining
•
Deburr the contact surface.
EC-252-0
Fig. 35:
•
Adapt the new lining (3).
•
Weld short I seams on the
upper surface
of the cutter bar in the areas marked (1) (each
should be approx. 30 mm).
•
Do not weld the edges (2).
•
On the
lower surface
of the cutter bar, weld the lining (3) to the cutter bar along the
whole length in area (5).
•
Do not weld the edges (4).
Pos : 27.28 /BA/-----Seitenumbruc h------ @ 0\mod_1196175311226_0.doc @ 4165
