
Operation
8
Fitting wheel chocks
8.8
Comprima F 155 XC
Original Operating Instructions 150001050_01_en
77
The safety cable (1) applies the parking brake (3) if the machine breaks away from the tractor
while it is driving.
To attach the safety cable (1) to the machine, attach the safety cable (1) to the parking
brake (3). To do this, pull the safety cable (1) through the smaller loop of the safety cable (1)
and through the ring (2).
To attach the safety cable (1) to the tractor, attach the other end of the safety cable (1) to a
suitable point at the back of the tractor.
Ensure that the safety cable (1) cannot slip or become detached.
8.8
Fitting wheel chocks
1
2
RPG000-012
The wheel chocks (1) secure the machine against rolling away. 2 wheel chocks are affixed to
the machine.
For "Parking brake" version:
In order to prevent the machine from rolling away, use the
parking brake in addition to the wheel chocks (1),
.
ü
The machine is shut down and safeguarded,
.
To dismount the wheel chocks (1) from the machine, press the supports (2) down, pull the
wheel chocks (1) upwards, and remove them.
1
1
RPG000-180
Park the machine on level and firm ground.
Place the wheel chocks (1) so close before and behind the same wheel that the machine
cannot roll off.