Krone Comprima F 155 XC, Оригинальная инструкция по эксплуатации, Страница: 141 / 278

Terminal menus 15
Menu 3 “Advance signalling” 15.10
Comprima F 155 XC
Original Operating Instructions 150001050_01_en 141
Adjusting the number of film layers
„
Increase or decrease the value, refer to page 137 .
„
To save the value, press .
INFORMATION
KRONE recommends 3.5 – 4 film layers for optimum chamber film wrapping. The minimum
required film layers depend on the condition of the crops.
With round bales whose diameter measures more than 130 cm and/or very dry or very wet
crops, KRONE recommends at least one additional film layer.
15.10 Menu 3 “Advance signalling”
Pre-signalling is used to warn if the round bale in the bale chamber is near completion. On the
terminal you can set the filling for which pre-signalling starts.
n
90
0
5
%
3
EQG003-002
ü For The menu level is active, refer to page 136 .
„ To open the menu, press .
Æ
The display shows menu “Advance signalling”.
Setting advance signalling
„
Increase or decrease the value, refer to page 137 .
„ To save the value, press .
15.11 Menu 4 “Tying start delay” (net wrapping)
Tying start delay is used to set the period of time which is required between completion of round
bale in the bale chamber and triggering the tying cycle. The tying start delay is set in seconds.
Setting range: 0.0–1.0 s